1050 System Board - Lenovo MIIX 3-830 Hardware Maintenance Manual

1050 System board

Important notices for handling the system board:
When handling the system board, bear the following in mind.
• Be careful not to drop the system board on a bench top that has a hard surface,
such as metal, wood, or composite.
• Avoid rough handling of any kind.
• In the whole process, make sure not to drop or stack the system board.
• If you put a system board down, make sure to put it only on a padded surface such
as an ESD mat or conductive corrugated material.
For access, remove these FRUs in order:
• "1010 LCD cover" on page 30
• "1020 Battery pack" on page 33
• "1030 Speaker" on page 36
• "1040 Camera" on page 38
Figure 5. Removal steps of system board
Remove the two pieces of conductive tape. Unplug the three connectors
shown by arrows
microphone hole
When installing: Make sure that all the connectors are attached firmly.
, and . Release the microphone module from the
1 2 3
.
4
Lenovo MIIX 3-830
39