Loading Batteries - Kenwood HM-353V Instruction Manual

SOUND key
Used for switching the EX.BASS play and LOUDNESS
play.
TONE key
This is used to adjust the tone.
TIME key
Press to switch the time information displayed during
CD-DA and VIDEO CD (with PBC OFF) playback.
REPEAT key
This is used for repeated playback.
RANDOM key
Playback of the CD-DA and VIDEO CD (with PBC OFF)
tracks in random order.
7
AUTO/PAL/NTSC key
Press to switch the video output signal format.
ON SCREEN key
Used to select the information to be displayed on the TV
screen.
8
AUTO/MONO key
During tuner reception, press to switch the tuning mode
of the tuner.
PGM key
When CD input is selected :
This is used to program the track sequence.
SET key
In program playback of CD-DA and VIDEO CD (with PBC
OFF), press to enter the selected track number in
memory.
Press to set or enter an item selected with the volume/
multi control knob.

Loading batteries

1
Remove the cover.
Operation
After plugging the power cord of this unit, press the
POWER ( ) key of the remote control unit to turn
the system ON. When the system is turned ON,
press the key of the function to be operated.
÷ When pressing more than one remote control keys
successively, press the keys securely by leaving an in-
terval of 1 second or more between keys.
÷ The provided batteries are intended for use in operation checking, and their service life may be short.
÷ When the remote controllable distance becomes short, replace both of the batteries with new ones.
Notes Notes
÷ If direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote
sensor, malfunction may occur. In such a case, change the installation position to avoid malfunction.
&
9
&
)
0
º
⁄
%
$
∞
•
•
2
Insert batteries.
÷ Insert two R6 ("AA"-size) batteries following the polarity indications.
Operating range (approx.)
CLEAR key
The programmed track sequence is cleared.
Numeric key
These are used to select CD-DA, VIDEO CD tracks and
MP3 file and as preset
Keys connected with the VIDEO CD
RESUME key
Used for to resume VIDEO CD and CD-DA playback
from the location where playback was last stopped.
TIME SEARCH key
Used to jump to a specific location on a VIDEO CD and
CD-DA.
DIGEST key
Used for the Digest functions to scan a disc of a VIDEO
CD and CD-DA.
AUTO PBC key
Press to activate/deactivate the playback control (PBC)
functions of a VIDEO CD.
SLOW key
Used for slow-motion playback of a VIDEO CD.
STEP key
Used to advance the picture of a VIDEO CD frame by
frame.
FREEZE key
Used to freeze the image of a VIDEO CD.
MULTI PLEX key
Used to change the audio output channel of a VIDEO CD
and MP3 files.
3
Close the cover.
Remote sensor
FM/AM 6
30˚ 30˚
TIMER POWER
AUX TAPE TUNER CD
BAND SELECT
STOP
O.T.E. REC TAPE EQ. RETURN
TUNING
P. CALL P. CALL
VOLUME
MUTE ENTER
SLEEP SOUND TONE TIME
AUTO PAL
REPEAT RANDOM NTSC ON SCREEN
1 2 3 AUTO/MONO PGM
4 5 6 SET
7 8 9 CLEAR
10 0
RESUME TIME SEARCH DIGEST AUTO PBC
SLOW STEP FREEZE MULTI PLEX
RC-M0304V
13
Controls and indicators
ª
(∞‚q
‚
‚
q
*‡
·
·
·
·
6 m