System Connections - Kenwood DMF-9020 Instruction Manual

System connections

Make connection as shown below. When connecting
the related system components, refer also to the in-
10
struction manuals of the related components.
Caution: Do not plug in the power lead until all connec-
tions are completed.
REC PLAY
Audio cords 2
(accessories)
DIGITAL input / output jacks
(OPTICAL)
Remove protective caps
from digital input/output
jacks before use.
÷ Be careful not to lose the protective caps.
1. Connect all cords firmly. If connections are loose, there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
Notes Notes
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
MD
SYSTEM CONTROL
ƒ
L
SL 16 XS-8
R
DIGITAL
System control
OUTPUT
cord (CD player
OPTICAL
optional)
Optical fiber
cable 1
(accessories)
Optical fiber cable
(optional)
L I N E
REC PLAY
I N OUT
L L
R R
DIGITAL
REC PLAY
IN
1 COAX. 2 OPT. 3 COAX. COAX.
Remove cap.
Malfunction of microprocessor
If operation is not possible or erroneous display ap-
pears even though all connections have been made
properly, reset the microprocessor referring to "In
case of difficulty".
Integrated amplifier
SYSTEM CONTROL
ƒ
CD player
SL 16 XS-8
REC
MD recorder
IN
1 COAX. 2 OPT. 3 COAX.
System control cord 1
(accessories)
SYSTEM
D I G I T A L
CONTROL
REC PLAY
OUT
IN
COAX. OPT.
1 COAX. 2 OPT. 3 COAX.
TEXT
OUT
OPT.
÷ When connecting the audio cords (cords with pin plugs on each end), insert
the white plugs into the L (Left) jacks and red plugs into the R (Right) jacks.
÷ If the system components are equipped with more than one system control
cord connectors, any one of the connectors can be used.
DMF-9020/MD-2070 (En)
- + - +
R
TO WALL AC
OUTLET
Q