Compact Disc Player - Sherwood WA-240 Operating Instructions Manual

COMPACT DISC PLAYER

PROBLEM
No sound
Skipping sound or tracks.
Not programming
CASSETTE DECK
PROBLEM
No sound
Distorted sound
Not recording
Vibrating sound
POSSIBLE CAUSE
There is no disc.
The disc is not loaded with the
printed side up.
It is in the pause mode.
The disc is dirty or scratched.
The disc is dirty or scratched.
The programming procedure is not
correct.
The memory is already full of 20
tracks.
POSSIBLE CAUSE
A non-recorded tape is being played.
The head is dirty.
The head is dirty.
The tape is stretched or wrinkled.
The tabs have been removed.
The capstans or pinch rollers are
dirty.
The tape is irregularly wound.
39
REMEDY
Load a disc.
Load it with the printed side up
Cancel the pause mode.
Clean it or load another disc.
Clean it or load another disc.
Try to program again
Check the number of the
programmed tracks.
REMEDY
Play back a recorded tape.
Clean the head.
Clean the head.
Play back another tape.
Cover it with adhesive tape.
Clean the capstans or pinch rollers.
Wind the tape regularly by rapidly
advancing, rewinding or playing it
back fully from one reel to the other.