Cleaning And Care; Cleaning The Lint Filters - Miele PT 7135 C Operating And Installation Instructions

Cleaning and Care

Cleaning the lint filters

Fluff from items being dried is collected
by the fluff filters in the door and the
door opening. Clean the filters after
each drying program*.
Cleaning them while dry
^ Open the door and pull the lint filter
(1) out as illustrated.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
22
^ Remove any fluff from the hollow part
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele dealer or the Miele Spare
Parts Department or use a vacuum
cleaner.
^ Once clean, push the filter back into
the door hold until it clicks into
position. Ensure it is facing the
correct way.
^ Also clean the door seal (2) with a
damp cloth.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the two lint
filters in the door opening.
^ Close the door.
,
* The fluff filters should be
checked and cleaned regularly but
always clean immediately the Clean
out airways message appears.