Rinsing The System Manually; Cappuccinatore - Miele CM 5100 Operating Instructions Manual

^ In the main menu, press the OK
button for two seconds.
SETTINGS
r AUTOMATIC RINSING
^ Turn the rotary control until AUTO-
MATIC RINSING appears in the
display.
Press the OK button.
^ Turn the rotary control until YES
appears in the display, if you want to
switch the automatic rinsing function
on.
or
^ Turn the rotary control until NO
appears in the display, if you want to
switch the automatic rinsing function
off.
^ Then press the OK button.
The setting is now saved.

Rinsing the system manually

If you have switched the automatic
rinsing function off, you will need to
rinse the system through manually if
you have used the machine.
^ Place a suitable container
underneath the coffee spouts.
^ In the main menu, press the OK
button for two seconds.
SETTINGS
r MAINTENANCE
^ Turn the rotary control until
MAINTENANCE appears in the
display.
Press the OK button.
^ Turn the rotary control until RINSE
THE SYSTEM appears in the display.
Press the OK button.
^ Turn the rotary control until START
s
appears in the display.
Press the OK button.
The piping will now be rinsed through.
The water used for the rinsing process
will run out of the coffee spouts.

Cappuccinatore

The cappuccinatore can become
clogged with milk residues so it should
be rinsed through if more than an hour
has elapsed since a drink with milk has
been prepared. Milk residue can clog
up the cappuccinatore.
If the cappuccinatore is used to heat or
froth milk, it is important to take it apart
and clean it once a day.
The cappuccinatore must be cleaned
by hand only using hot water and a little
washing-up liquid.
s
Cleaning and care
47