Frothing And Heating Milk; Preparation; Preparing Milk Froth - Miele CM 5100 Operating Instructions Manual

Frothing and heating milk

You can use the coffee machine to heat
or froth milk.
The coffee machine draws the milk
through a tube from the container, e.g.
a milk carton. Steam is then used to
heat the milk in the cappuccinatore. It
can also be frothed if milk froth is
required.
If you have not prepared any milk
drinks for some time, rinse the milk
system before preparing the first
drink to remove any bacteria which
may have formed in the milk tube
and in the cappuccinatore.

Preparation

^ Place a container with sufficient milk
beside the coffee machine on the
right hand side.
^ Insert the milk tube in the container.
Make sure that the milk tube is
sufficiently submerged in the milk.
Caution. Danger of burning and
scalding on the cappuccinatore. The
liquids and steam dispensed are
very hot.
24

Preparing milk froth

^ Turn the cappuccinatore dial to the
z position.
^ Place a cup or suitable container
under the cappuccinatore.
^ Press the * button.
The coffee machine will heat up.
HEATING-UP PHASE will appear in the
display. After being heated, milk froth
will be dispensed from the
cappuccinatore into the container
underneath.
^ Press the OK button when there is
enough milk froth in the container.
If the level of milk in the milk container
is higher than the cappuccinatore, turn
the dial on the cappuccinatore back to
the - position to stem the flow of milk.
TIP For best results use cold milk
(<13 °C).