Ford 2013 C-MAX ENERGI Owner's Manual page 338

5. Remove the warning sticker found on the canister and place it on the
top of the instrument panel or the center of the dash.
6. Note: Start the engine only if the vehicle is outdoors or in a
well-ventilated area.
Note: When the sealing compound is first added into the tire, the air
pressure gauge reading on the compressor unit may indicate a higher
value; this is normal and should be no reason for concern. The pressure
will drop after about 30 seconds of operation. The tire pressure has to be
checked with the compressor in the OFF position to get the correct tire
pressure reading.
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 2nd Printing
USA (fus)
Wheels and Tires
4. Plug the power cable into the
12-volt power point in the vehicle.
7. Push and turn dial (A)
counterclockwise to the sealant
B
position. Turn on the kit by pressing
the on button (B).
A
8. Inflate the tire to the pressure
listed on the Tire Label located on
the driver's door or the door jamb
area.
337