FujiFilm X100T Owner's Manual page 11

3
Insert the memory card.
Holding the memory card in the orientation
shown, slide it in until it clicks into place at the
back of the slot.
Q Be sure card is in the correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted or no memory card
is inserted, a will appear in the LCD monitor
and internal memory will be used for recording
and playback.
Click!
Inserting the Battery and a Memory Card
4
Close the battery-chamber cover.
Removing the Battery and Memory Card Removing the Battery and Memory Card
Before removing the battery or memory card, turn
the camera off and open the battery-chamber cover.
To remove the battery, press
the battery latch to the side,
and slide the battery out of
the camera as shown.
To remove the memory card,
press it in and release it slowly.
The card can then be removed
by hand. When a memory
card is removed, the card
could come out of the slot too
quickly. Use your fi nger to hold
it and gently release the card.
Battery latch
11