Adjusting The Volume; Adjusting The Tone (Stereo Mode Only) - Kenwood KRF-V7773D User Manual

How Do I Adjust the Sound?

Adjusting the Volume

Use one of the following methods to adjust the volume.
• Turn the VOLUME knob on the front panel of the receiver.
L SPEAKERS R INPUT CD 2/TAPE 2 LISTEN
MODE MONITOR MODE
VOL.
+ -
• Press or on Remote Control unit.
VOL.
2WAY LCD REMOTE CONTROL UNIT
+
-
10
fi MULTI % fi P.CALL % MEMORY AUTO BAND
SET UP SOUND CONTROL
+
-
How Do I Adjust the Sound?

Adjusting the Tone (Stereo mode only)

The Tone control adjusts the bass and treble tone of your front speakers
manually. In addition to setting Bass and Treble tone adjustment values,
you can completely bypass the tone control circuitry for a purer sound.
1. Press the SOUND key on Remote Control unit repeatedly until Tone
= Off or On is displayed.
On or Off refers to the current setting status.
Sound
Tone
Home Next
2. Press the LCD cursor up/down (
to select Tone = On (or Off if desired so).
Sound
Bass
Home Next
3. When On is selected above and the SOUND key or Next key is pressed
again, the Bass setting menu appears.
When Off is selected above, the Loudness setting menu appears.
4. Press the LCD cursor up/down (
to select the desired tone level.
Adjust in the range from +10 to -10.
= Off
/ ) key on Remote Control unit
= +10
/ ) key on Remote Control unit
11