AUDIO VIDEO SURROUND RECEIVER KRF-V7030D KRF-V6030D KRF-V5030D KRF-V4530D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control (RC-R0610)...
Before applying the power Unpacking Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped to you directly, notify the shipping company without delay.
Before applying the power Contents Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. Before applying the power ....2 Safety precautions ..........
How to use this manual Special features True home theater sound The manual covers the KRF-V7030D, KRF-V6030D, KRF-V5030D, and KRF-V4530D. Items such as functions, number of jacks, and remote This receiver incorporates a wide variety of surround modes to bring you control details differ somewhat between these models.
Names and functions of parts Remote control unit (RC-R0610) (KRF-V7030D/V6030D) POWER POWER VCR/CDR RETURN LSTN.M DISPLAY MENU SET UP SOUND P.CALL P.CALL MULTI CONTROL TUNING ENTER BAND A/B+100 AUTO & B.BOOST DISC SKIP RECEIVER TITLE INPUT SEL. PHONO CD/DVD TUNER MD/TAPE CHANNEL TV SEL.
Page 7
Remote control unit (RC-R0510) (KRF-V5030D/V4530D) Press the DVD POWER key on the remote control for more than 2 seconds to turn on the connected KENWOOD DVD player. Press the DVD POWER POWER key again to activate the DVD player operation mode.
TosLink) of the CD, LD or DVD player. The only audio product model incorporating the DTS Digital Surround decoder is the KRF-V7030D. VIDEO 2/MONITOR jacks (for KRF-V6030D/V5030D/V4530D) The receiver’s jacks can be used in two different ways. Make the appropriate setting for the component connected to the jack when the receiver is turned on.
Setting up the system Connecting video components Connecting a DVD player (6-channel input) If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section on the following page carefully. About the S VIDEO jacks PLAY IN...
Setting up the system Digital connections Input mode settings (KRF-V7030D only) inputs each The digital in jacks can accept DTS, Dolby Digital (AC-3), or PCM signals. include jacks for digital audio input and analog audio input. Connect components capable of outputting DTS, Dolby Digital (AC-3), or You must select beforehand which type of input is to be used for each standard PCM (CD) format digital signals.
Setting up the system Connecting to the AUX IN jacks Connecting the antennas (KRF-V7030D only) AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from jacks are convenient for connection of video components the receiver, TV set, speaker cords and power cord, and adjust the direction such as a camcorders and video games.
• Once you finish making the system connections, be sure to register the appropriate setup code for each component. • If you own remote controllable KENWOOD audio components that are not compatible with system control, registering the setup code en-...
Setting up the system Connecting the speakers • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker The KRF-V5030D/ cords are connected with reversed polarity, the sound will be unnatu- Right Left V4530D are equipped...
Setting up the system Preparing the remote control Speaker placement Loading the batteries Center speaker Subwoofer Front speaker Listening position Surround speaker : Place to the front left and right of the listening position. Front speakers are required for all surround modes. : Place front and center.
(normal) An average size center speaker is con- MULTI CONTROL nected to the receiver. KRF-V6030D/ No center speaker is connected to the V5030D/ SET UP receiver. V4530D A center speaker is connected to the receiver.
Normal playback Preparing for surround sound Preparing for playback Input the distance to the speakers. Some preparatory steps are needed before starting playback. INPUT MODE Distance to front speakers: ____ feet (meters) ON/STANDBY AUTO Distance to center speaker: ____ feet (meters) Distance to surround speakers: ____ feet (meters) The speaker indicator to be adjusted blinks.
Normal playback Listening to a source component Adjusting the sound VOLUME CONTROL MULTI CONTROL INPUT SELECTOR SOURCE DIRECT KRF-V6030D/ V5030D/ SOUND V4530D SPEAKERS A/B VOLUME CONTROL PHONES SOUND SOUND INPUT INPUT MULTI MULTI CONTROL CONTROL SELECTOR SELECTOR B.BOOST BASS BOOST...
Recording Normal playback Recording audio (analog sources) Muting the sound MONITOR key lets you mute the sound of the speakers. TI.VOL CLIP MUTE RDS EON NEWS Blinks INPUT SELECTOR To cancel • Muting can also be canceled by adjusting the volume. Recording a music source SOURCE DIRECT playback (analog sources only) Use this function to pass the source material direct to the amplifier,...
Recording Recording video Recording music in M-REC MODE DIMMER • Select the REC MODE to record a digital input source. • With certain video software, recording may not be normal due to the • copy guard condition. Recording audio (digital sources) INPUT SELECTOR Switch on the to record a digital input source.
RDS reception can extract the information from the see the section entitled, "Using RDS". broadcast signal for use with various functions, such as automatic display MULTI CONTROL of the station name. KRF-V6030D/ V5030D/ INPUT SELECTOR V4530D RDS functions: £...
Listening to radio broadcasts Using the DISPLAY key Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
¡ “Presetting RDS stations (RDS AUTO MEMORY)”. 0 0 ) MULTI CONTROL • If you make a mistake entering a two digit number, press the KRF-V6030D/ V5030D/ MEMORY several times to return to the original display and start again. V4530D...
Listening to radio broadcasts Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations Press the PTY key to start searching. which are currently broadcasting the type of program (genre) you want to listen to.
Ambience effects Dolby Digital (AC-3) The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1 channels of digital surround sound from Dolby Digital (AC-3) program sources (such as Laserdisc or DVD software marked ). Com- pared with previous Dolby surround, Dolby Digital (AC-3) provides even better sound quality, greater spatial accuracy, and improved dynamic range.
Ambience effects Surround Play The DTS compatible models can reproduce a CD, DVD, or LD carrying Dolby 3 Stereo the DTS mark. (KRF-V7030D only) Dolby 3 Stereo is available for systems that do not have surround speakers. When in the Dolby 3 Stereo mode, the surround information DOLBY DIGITAL can be used when playing DVD or LD software bearing is redirected to the front left and right speakers.
Ambience effects When the DTS signal is input: (KRF-V7030D only) DVD 6-channel playback (The DTS indicator lights up.) Using a DVD player or the like equipped with six (5.1) output channels and DTS surround the receiver, you can enjoy surround sound playback. Normal stereo playback When you try to play a disc other than Dolby Digital (AC-3) such as DTS CD, no sound is produced or, noise may be heard.
Ambience effects Convenient functions MULTI CONTROL KRF-V6030D/ AUTO SOUND DIGITAL AUTO TI.VOL PRO LOGIC S.DIRECT MEMO V5030D/ CLIP MUTE DIMMER STEREO MONITOR RDS EON V4530D TUNED DOWN MIX NEWS • The adjustment item is displayed for approximately 8 seconds. • Some Dolby Digital (AC-3) software may not be compatible with the Midnight mode.
In case of difficulty Resetting the Microcomputer • Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory. Amplifier • Connect them properly referring to “Connecting •...
Ω Ω Ω Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Page 32
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.