Table of Contents
Advertisement
Battery installation
3.
Insert four new AA alkaline batteries (not provided) into the battery
compartment, following the polarity markings.
4.
Insert the small tabs on the battery compartment cover into the slots on
the battery compartment at the telephone base. Then press down on the
battery compartment cover as the arrows indicated until it clicks into place.
If no batteries are installed or the batteries fail, you can make or answer calls
using only the handset.
NOTES:
•
Use disposable AA alkaline batteries only. Do not use rechargeable batteries.
•
If you do not use the telephone for a long time, disconnect and remove
the batteries from the telephone to prevent possible leakage.
•
After replacing the batteries, you need to reset the date and time. For
instructions, see Set date and time on page 8.
•
If no batteries are installed, you can only make or answer calls using the
handset. After then, you can press
SPEAKER to switch to the speakerphone.
5
Hide quick links:
Advertisement
Table of Contents
