Installing The Cooktop - Miele KM 421 Installation Instructions Manual

Installing the cooktop

^ Feed the power cord down through
the cut-out and connect the
appliance to the power supply.
^ Position the cooktop on the spring
clips, a.
^ Then with a hand on each side of the
cooktop press down on the edges
evenly until it clicks into position.
When doing so make sure that the
cooktop seal sits tightly on the
countertop to ensure a correct seal is
provided.
The cooktop can now only be
removed with a special tool.
The cooktop must not be
permanently sealed into the
countertop when installed. The
sealing strip under the edge of the
cooktop provides a sufficient seal for
the countertop.
If the cooktop is sealed into position,
the countertop or appliance could be
damaged if the cooktop needs to be
removed for maintenance or service.
Installation
9