Silencing The Alarm; De-Activating The Alarm - Taylor 1542 Instruction Manual

In the normal time display, press the MODE button to choose the alarm (A1 or A2) that you want to
activate. Press SET to activate (the alarm bell icon and 1 or 2 will show). The alarm will sound at the
time you have entered.

Silencing the Alarm

•
When the alarm sounds press any button on the front of the base station to silence the alert or press
the SNOOZE button on the back of the unit to activate the snooze function.
•
When snooze is activated the Zzz symbol will appear and the alarm will sound again in 5 minutes.
•
When the alarm sounds again, press SNZ to continue the snooze function or press any button on
the front of the base station to discontinue snooze.
•
The alarm icon will remain on the display and the alarm will sound every day at the pre-set time
until the alarm is de-activated.

De-activating the Alarm

To de-activate the alarms, press the MODE button to choose the alarm (A1 or A2) that you want to de-
activate. Press the SET button until the alarm bell icon is no longer showing. Your alarm time settings
will remain and you can re-activate the alarms by following the instructions above.
Min/Max Memory
•
Press the MAX/MIN button once to display the highest indoor and outdoor temperatures recorded
since last reset. MAX is shown on the display.
•
Press MAX/MIN a second time to display the lowest indoor and outdoor temperatures recorded
since last reset. MIN is shown on the display.
•
To clear and reset the max/min records, when either the MAX or MIN record is shown on the
LCD display, press and hold MAX/MIN for 2-3 seconds until the beep sounds.
Setting the Temperature Alerts
You can program your weather center to sound an alert whenever the indoor or outdoor temperature
exceeds the upper or lower pre-set level. The outdoor alert can be set for all remote channels.
Setting the Indoor Temperature Alert
•
Press and hold the ALERT button for 3-4 seconds. The high temperature limit icon and indoor
temperature will be flashing.
•
Press UP or DOWN to select the high temperature alert level.
•
Press ALERT and the low temperature limit icon and temperature will be flashing.
•
Press UP or DOWN to select the low temperature alert level.
•
Press ALERT to return to normal mode.
•
Press ALERT to activate or de-activate the alert function. When the alert function is activated,
both the high and low limit icons will show.
Setting the Outdoor Temperature Alert
•
Press and hold the ALERT button for 3-4 seconds.
•
Press CHANNEL to select the channel on which you want to set the alert. (1 to 3)
•
The high temperature limit icon and outdoor temperature for the channel you selected will be
flashing.
•
Press UP or DOWN to select the high temperature alert level.
•
Press ALERT and the low temperature limit icon and temperature will be flashing.
•
Press UP or DOWN to select the low temperature alert level.
•
Press ALERT to return to normal mode.