Table of Contents
Advertisement
. .
Iray and the VCA Manager
The installed versions of Iray are:
NVIDIA Iray 2014.5.3
NVIDIA Iray 2014.5
NVIDIA Iray 2015
The installed version of the VCA Manager is VCA Manager Version 231000.8180.
. .
Directory layout
Iray and the VCA Manager are installed in the directory
of the following subdirectories:
Subdirectory
cluster-server-version-buildnumber
cluster-server-bunkspeed
cluster-manager
cm
Note the following:
The build number (
For compatability, the Iray client version has to be identical in the first part and have an
equal or higher version number for the second part. For Iray 2015, the client finds the
correct server version itself.
The VCA Manager database contains the user accounts for the VCA Manager. The VCA
Manager database is not overwritten when updating the VCA Manager.
Hardware installation
.
Rack mounting
This section provides instructions on how to rack mount and connect your Quadro VCA.
Following the steps in the order given should enable you to have the system operational
within a minimal amount of time.
. .
Setup location
Decide on a suitable location for setting up and operating the Quadro VCA. The location
should be clean, dust-free, and well ventilated. Avoid areas where heat, electrical noise, and
electromagnetic fields are generated. Locate the VCA near a grounded power outlet.
Leave enough clearance in front of the rack to enable you to open the front door com-
pletely ( 25").
Leave approximately 30" (76.2cm) of clearance in the back of the rack to allow for suffi-
©
,
NVIDIA ARC GmbH
) consists of two parts, for example:
buildnumber
Quadro VCA — Installation Guide
. This directory consists
/home/iray
Description
Iray 2014 installation
Iray 2014 for Bunkspeed Zoom
VCA Manager installation
VCA Manager startup scripts and
VCA Manager database.
Hardware installation
.
221133.2594
Advertisement
Table of Contents
