Kenwood KR-V888D Instruction Manual page 21

6CH.INPUT playback
This function allows you to pair the video signal input to the VIDEO 2 VIDEO jack with audio signals input to the 6CH.INPUT jacks.
1 Set the INPUT SELECTOR to VIDEO 2.
2 Hold down the AUTO key for more than
2 seconds.
Listening with a graphic equalizer
Hold down the DIMMER key for more
than 2 seconds.
INPUT SELECTOR
AUTO
DIMMER
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
AUDIO VIDEO SURROUND RECEIVER KR-V888D
BAND
4 6 ¢
7
REC GUIDE
TA/NEWS/INFO. PTY DISPLAY
TUNING/SKIP VOLUME
MUTE
ON/STANDBY
A SPEAKERS B
POWER
LISTEN
MODE
SUBWOOFER SOUND -ON –OFF
PHONES
FUNCTION SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
+100 REPEAT RANDOM Keys or controls used in this operation.
7 8 9
DISPLAY
+10 ENT
0
VIDEO2
SP. A B
VIDEO2
• When the receiver is set to this mode, it functions as a multi-channel
amplifier (the surround effects (etc.) cannot be activated).
• The sound of the front channel is output from the SPEAKERS A only.
• The receiver switches to the multi-channel amplification mode auto-
matically whenever VIDEO 2 is selected.
• To undo this setting and listen to the audio signals input to the VIDEO
2 AUDIO jacks, repeat this procedure so that "LINE MODE" appears.
ADPT ON
SP. A B
Appears for a few seconds after the adaptor input is
turned on.
• When the receiver is set to this mode, the audio signals are looped
through the graphic equalizer connected to the ADAPTOR OUT and IN
jacks on the rear panel.
• When the adaptor is on, the overall volume is slightly decreased.
• To undo this setting, repeat this procedure to display "ADPT OFF".
Normal playback
KR-V888D (En/T)
DOLBY
DIGITAL PRO LOGIC
3 STEREO STEREO
LEVEL 2-CH INPUT SELECTOR
STANDBY INDICATOR DOWNMIX SOURCE DIRECT DSP
+10/
1 2 3 4 5 6 7 8 9 0 PTY SEARCH
DIMMER LOUDNESS
LEVEL CONTROL
DIRECT MEMORY AUTO BAND TUNING BASS TREBLE MUTE
AV AUX
T R A I T R
thermally reactive advanced instantaneous transistor VIDEO
9
Lights
M. INPUT
2 1
VOLUME CONTROL
DOWN UP
L - AUDIO - R
9