Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KR-V8090 Instruction Manual

The RDS auto memory function assigns preset numbers to
RDS stations starting from preset number "1". Therefore, be
sure to execute the RDS auto memory function before using
the following operations to manually store AM stations and
other FM stations, and RDS stations.
"Presetting RDS stations (RDS AUTO MEMORY)".
Preparation
• Select tuner.

Presetting radio stations manually

1 Tune to the station you want to
2 Press the MEMORY key while re-
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press
MEMORY again).
3 Enter a preset number (1~40).

Receiving preset stations

1 Select tuner.
2 Enter the number of the preset

Receiving preset stations in order

When using the remote control, press AUDIO to select the
tuner control mode.
Preset numbers «
store.
ceiving the station.
MEMORY
4 5 6 7 8 9
INPUT SELECTOR
you want to receive (up to "40").
4 5 6 7 8 9
Preset numbers »
P. CALL P. CALL
4 ¢
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
BAND
4 6 ¢
7
REC GUIDE
§
TUNING/SKIP VOLUME
MUTE
LISTEN
SUBWOOFER MODE SOUND
FUNCTION SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
+100 REPEAT RANDOM
7 8 9
DISPLAY
+10 0 ENT
• In addition to the RDS auto memory function, RDS stations can also be
stored manually in the preset memory.
• When storing radio stations manually, it may take a few minutes before
the "MEMORY" indicator appears in the display after pressing the
MEMORY key depending on receiving conditions.
Blinks for 5 seconds
)-
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• Repeat steps 1, 2 and 3 to store as many stations as necessary.
• If you store a station at a previously used preset, the old station will be
replaced by the new one.
• When RDS stations are stored manually in the preset memory, the PS
information may not be included in the memory depending on receiving
conditions.
Press the numeric keys in the following order:
For "15", press 0,5
For "20", press 0,0,)
• If you make a mistake entering a two digit number, press the +10 key
several times to return to the original display and start again.
Preset number stored in memory
SP. A
A
(P.CALL)
• Each time you press the key, another preset station is received in order.
When you press ¢
1=2=3=
When you press 4
1+2+3+
Holding down the button, lets you skip through the presets,
receiving each for 0.5 seconds apiece.
Listening to radio broadcasts
AUDIO VIDEO SURROUND RECEIVER KR-V9090
LEVEL
STANDBY INDICATOR
TA/NEWS/INFO. PTY DISPLAY
1 2 3 4 5 6 7 8 9 0
ON/STANDBY
A SPEAKERS B
LEVEL CONTROL
DIRECT MEMORY AUTO BAND TUNING BASS TREBLE
POWER
-ON –OFF
PHONES
T R A I T R
thermally reactive advanced instantaneous transistor
Keys or controls used in this operation.
FM
89 )) .
MHz
15 89 ))
38=39=40=1=2=3=
38+39+40+1+2+3+
KR-V9090/8090 (En/T)
2 7
PRO LOGIC 3 STEREO
STEREO DSP
INPUT SELECTOR VOLUME CONTROL
LOUDNESS SOURCE DIRECT
MUTE
+10/
PTY SEARCH
MUTE
DIMMER
CENTER MODE
DOWN UP
AV AUX
VIDEO L - AUDIO - R
Lights for 5 seconds
MEMORY
STEREO
TUNED
FM
.
MHz