Electrical System; Instrument Panel - Opel Meriva Owner's Manual

3. Rotate the bulb holder clockwise
and remove.
4. Pull the bulb out of the bulb holder
and replace it.
5. Insert the bulb holder into the
housing and turn it anticlockwise.
6. Plug in the connector.
7. Attach the housing.

Instrument panel

illumination
Have bulbs replaced by a workshop.

Electrical system

Fuses
Data on the replacement fuse must
match the data on the defective fuse.
There are three fuse boxes in the
vehicle:
■ in the front left of the engine
compartment,
■ In left-hand drive vehicles, in the
interior behind the storage
compartment, or, in right-hand
drive vehicles, behind the
glovebox,
■ behind a cover on the left side of the
load compartment.
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognized by its
melted wire. Do not replace the fuse
until the cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.
Vehicle care
Fuse extractor
A fuse extractor may be located in the
fuse box in the engine compartment.
183