Heat Exchanger; Front Panel; Cleaning - Mitsubishi Electric MSZ-GC22VA Operating Instructions Manual

C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
Air fi lter (Catechin air fi lter)
• Clean every 2 weeks
• Remove dirt by a vacuum cleaner, or wash with water.
• Dry it well in shade before installing it.

Front panel

Hinge
Hole
1. Lift the front panel until a "click" is heard.
2. Hold the hinges and pull to remove as shown in the above illustration.
• Wipe with a soft dry cloth or wash it with water.
• Do not soak it in water for more than two hours.
• Dry it well in shade before installing it.
3. Install the panel by following the removal
procedure in reverse. Close the front panel
securely and press the positions indicated
by the arrows.
Air outlet and Fan (before cleaning, make sure that the fan is stopped)
1
Turn the horizontal vane upward.
Then, remove it as shown in ➀ and ➁.
1
Unlock
2
4
Put the vertical vanes back to
their original positions correctly
one by one, into their respective
guide.
• Push the vanes until they click into place.
Guide
• Use only diluted mild detergents.
• Do not expose parts to direct sunlight, heat, or fl ames to dry.
• Do not use water hotter than 50°C.

Heat exchanger

• Wear gloves to protect your
• Use the QUICK CLEAN KIT
• Refer to the instructions described
Air cleaning fi lter
(Anti-Allergy Enzyme Filter, option)
Back side of air fi lter
• Clean every 3 months.
• Soak the fi lter together with its frame in lukewarm water and wash
• After washing, dry it well in shade and put it back to its original position.
• Replace it with a new air cleaning
• Parts Number
What is "Catechin air fi lter" ?
Catechin is a biofl avonoid that is found in green tea that has both antivi-
ral and antioxidant qualities. In addition to these benefi ts, Catechin also
offers excellent deodorizing characteristics. Catechin air fi lter uses this
compound to not only improve air quality but also prevent the spread of
bacteria and viruses in the room.
Note:
Clean the fi lters regularly for best performance and to reduce power
consumption.
2
Swing out the two vertical vanes
one by one.
Hold the tab
5
Install the horizontal vane by
following the removal procedure
in reverse.
• If the horizontal vane is not installed cor-
rectly, all LED lamps blink when power is
turned on.
hands.
(option).
Parts Number MAC-093SS-E
in the QUICK CLEAN KIT for details.
it.
Install all tabs of the air fi lter.
fi lter every year for best perform-
ance.
MAC-408FT-E
Pull to remove from the air fi lter
3
Clean the air outlet and fan.
• Wipe with a soft dry cloth.
Clean the fan.
• Use the QUICK CLEAN KIT (option).
Parts Number
• Refer to the instructions described in the
QUICK CLEAN KIT for details.
Note:
Do not apply excessive force to the fan or fan
guard.
MAC-093SS-E
En-6