Tascam HS-20 Owner's Manual page 119

Message
--- FULL FORMAT ---
FORMAT MM?
This will erase all DATA on card
--- FULL FORMAT ---
Formatting MM ...
Import All System Backup Data
from MM?
Initializing ...
Load Factory Preset?
Load selected folder?
"ssssssss"
Load selected take?
"tttttttt"
Loading File ...
Loading Playlist ...
Loading Folder ...
Loading Take ...
Loading Timer Event List ...
Make new Folder?
"ssssssss"
Make Playlist failed
Make folder failed
Making Playlist ...
Making Folder ...
Mark Point set
Mirror REC is not available.
(MM is not available)
Mirror REC is not available.
CF not recommended type
for Recording.
(not UltraDMA)
Mirror REC is not available.
MM formatting not optimal
for Recording.
Network Control Locked
New Folder Name must not
start with "@"
No Call Point
No Mark Point
Now Working ...
Do not remove Media.
Operation failed.
Operation failed.
Cannot find this ***.
Please Rebuild.
Operation failed.
Internal File/Folder
limit reached.
Operation failed.
Path Name is too long.
Operation Failed.
Unmatched Fs.
Meaning and response
Full formatting will be performed.
Full formatting is occurring.
Import all system backup data from the media.
The unit is initializing.
Load the factory settings.
Load the selected folder.
Load the selected take.
The file is being loaded.
The selected playlist is loading.
The folder is being loaded.
The selected take is loading.
The timer event list is being loaded.
Confirm that you want to create a new folder.
Failed to create a playlist.
Failed to create a folder.
A playlist is being created.
A folder is being created.
A mark has been created.
Mirror recording is not available because the media cannot be
used.
Mirroring is not available because the card does not meet the
specifications required by the system so correct recording cannot
be guaranteed.
Mirroring is not available because the media has not been
formatted on this unit so correct recording cannot be
guaranteed.
Format the media on this unit before use.
Network control has been locked to prevent misoperation.
That folder name is not allowed. You cannot use the "@" symbol
at the beginning of a folder name.
There is no call point.
(Nothing has been played back since loading this folder or take.)
There are no mark points.
An operation is in process, so do not remove the media.
The operation could not be completed for some reason.
The selected folder/take could not be found, so the operation
could not be completed. Rebuild the selected item.
The maximum number of folders that can be created has been
reached, so the operation could not be completed.
The path name has more characters than allowed, so the
operation could not be completed.
The sampling frequency does not match.
16 – Messages
Note
MM: SD, CF, or USB flash drive
MM: SD, CF, or USB flash drive
MM: SD or CF
nnnnnnnn: name of a folder to load
tttttttt: name of take to load
ssssssss: folder name
Occurs when REC Mode is set to
Mirror.
MM: SD or CF
Occurs when REC Mode is set to
Mirror.
Occurs when REC Mode is set to
Mirror.
MM: SD or CF
You tried to skip to a mark before one
was added. This disappears automati-
cally after 2 seconds.
***: Folder or take name
This message appears when making
a folder (NEW FOLDER) or recording
would result in a file path name of
more than 255 characters because
the lengths of folder names have
been increased using a computer.
119
TASCAM HS-20