Factory Defaults; Reboot - TP-Link TX-6610 User Manual

There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the ONT rather than the
configuration, you can try to upgrade the firmware.
2) When you upgrade the ONT's firmware, you may lose its current configurations, so before
upgrading the firmware please write down some of your customized settings to avoid losing
important settings.
3) Do not turn off the ONT or press the Reset button while the firmware is being upgraded. Loss
of power during the upgrade could damage the ONT.
4) The firmware version must correspond to the hardware.
5) The upgrade process takes a few moments and the ONT restarts automatically when the
upgrade is completed.

4.5.3 Factory Defaults

Choose menu "Management"
configurations of the ONT to its factory defaults on the following screen.
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
Note:
All changed settings will be lost when defaults are restored.

4.5.4 Reboot

Choose menu "Management"
ONT via the next screen.
TX-6610 1-Port Gigabit GPON Terminal User Guide
"Factory Defaults" and then and you can restore the
Figure 4-10
"Reboot" and then you can click the Reboot button to reboot the
18