1.3.2 The Back Panel
LAN: Through the port, you can connect the ONT to your PC or the other Ethernet network
devices.
OPTICAL: The OPTICAL is where you will connect the fiber.
RESET: There are two ways to reset the ONT's factory defaults.
Method one: With the ONT powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the ONT will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the ONT's
Web-based Utility.
POWER: The Power plug is where you will connect the power adapter.
ON/OFF: The switch for the power.
TX-6610
1-Port Gigabit GPON Terminal User Guide
Figure 1-2
4