Dic Vehicle Personalization - Pontiac 2006 G6 Owner's Manual

TOP TOO COLD
If your vehicle has a retractable hardtop, this message
displays when the retractable hardtop button is
pressed and the hardtop pump motor temperature is
too cold. Wait for the hardtop pump motor to warm up
before using the retractable hardtop. See Lowering
the Retractable Hardtop on page 2-44 and Raising the
Retractable Hardtop on page 2-47 for more information.
TRUNK AJAR
This message displays when the trunk is not closed
completely. Make sure that the trunk is closed
completely. See Trunk on page 2-12 for more
information.

DIC Vehicle Personalization

The following personalization options may appear on your
vehicle's audio display by pressing the MENU button.
The default settings for the features were set when your
vehicle left the factory, but may have been changed
from their default state since that time.
OIL LIFE RESET: When this option is displayed, you
can reset the engine oil life system. To reset the system,
see Engine Oil Life System on page 5-24.
3-50
UNITS: When UNITS appears on the display, press the
enter button to move between METRIC (default in
Canada) or ENGLISH (default in United States).
When you have made your choice, press the MENU
button to record your selection.
If you choose English, all information will be displayed
in English units.
If you choose metric, all information will be displayed in
metric units.
The unit measurement will also change the trip odometer,
temperature, and average fuel economy displays.
TIRE LEARN?: This option is available on vehicles
without the Remote Keyless Entry (RKE) system.
After rotating the tires or after replacing a tire or sensor,
the Tire Pressure Monitor System (TPMS) must
re-learn the tire positions. To re-learn the tire positions,
see Tire Pressure Monitor System on page 5-69.
See Tire Inspection and Rotation on page 5-76 and
DIC Warnings and Messages on page 3-46 for more
information.
REMOTE START: If your vehicle has this feature,
the remote start option can be enabled or disabled.
When REMOTE START appears on the display, press
the enter button to move between OFF and ON
(default). When you have made your choice, press the
MENU button to record your selection.