Dividing A Track (Track Divide) - Kenwood HM-381MD Instruction Manual

Dividing a track
Use the following procedure to divide a track into
two by inserting a track number in its middle.
For example, by inserting an additional track
number before the passage you are specially fond
of, it is easy to skip to there when you play the
disc later. Note that the track numbers of the
tracks located after the divided track are auto-
matically incremented.
Perform the operations in the following procedure while the display is blinking.
1
Play the track to be divided.
2
Press the TRACK EDIT key at the desired position.
1 Select "DIVIDE ?".
(Pressing the key during play-
back initiates pause.)
2 Set it.
3
Execute the track divide operation.
(Up to 255 track numbers can be inserted addition-
ally by repeating 1 to 3 for each of them.)
4
After editing, eject and remove the mini disc.
(TRACK DIVIDE)
TRACK
EDIT
SET
ENTER
Always remove the minidisc after title input or edit-
ing.
"WRITING" displayed during the minidisc ejection
operation indicates that the data associated with
recording or editing is being written on the disc. Do
not apply vibration or shock to the unit while this
message is displayed.
÷ This operation is also possible during pause.
Each press switches the operation.
1 DIVIDE ?
2 COMBINE ?
3 ERASE ?
4 Editing cancelled
TRACK NO. TOTAL AUTO TUNED
FM
0 0 2 C P 0 1 2
AM
PM
M D I V I D E N
0 0 2 C P 0 1 2
AM
PM
0 2 < > 0 0 3
0
Should be approx. 2 sec. or longer.
1 2
A B
1 2 3
A B
Divided track (second half)
0 0 6 Divided track (first half) 0 0 0 8
PM
O M P L E T E
C
÷There is no blank space left between the two tracks.
÷When the track to be split has a title, the two tracks will
have the same title.
MD Edit Functions
HM-381MD (En)
TP TA PTY
STEREO
kHz
BEST HITS O.T.E. NR T.E.
MHz
O ? •
TITLE SEARCH
MD EDIT
kHz
BEST HITS O.T.E. NR T.E.
MHz
O ? •
TITLE SEARCH
MD EDIT
3
C
Track number is
4
incremented.
C
MHz BEST HITS O.T.E
E ! •
57