HP ProLiant SL250s Gen8 Server User Manual page 57

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
Power down the node (on page 15).
1.
Extend the server from the rack.
2.
Remove the access panel.
3.
Remove the PCI riser board assembly.
4.
CAUTION: Any attempt to remove an installed TPM from the system board breaks or disfigures
the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM,
administrators should consider the system compromised and take appropriate measures to ensure
the integrity of the system data.
Install the TPM board. Press down on the connector to seat the board
5.
page 9).
Install the TPM security rivet by pressing the rivet firmly into the system board.
6.
Install the PCI riser board assembly.
7.
Install the access panel.
8.
("System board components" on
Hardware options installation 57