Before applying power Caution: Read this page carefully to ensure safe operation. Units are designed for operation as follows. U.S.A. and Canada ... AC 120V only Europe and U.K..AC 230V only WARNING Due to the mains switch was located at the rear panel, the apparatus must be located in the open area without any obstructions to access the mains switch.
Introduction Thank you for selecting our speakers as part of your high-fidelity system. We at KENWOOD are confident that your choice will bring you years of rich listening pleasure. Please take the time to read through this booklet carefully. It will help you to obtain the peak performance for which the speakers were designed.
IMPORTANT SAFEGUARDS Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.
Installation The Subwoofer is a virtually omnidirectional speaker, so it can be installed in almost any location. For example, the Subwoofer can be installed next to the component system (consisting of an amplifier, tuner, cassette deck, etc.), or in a corner of the room, etc..
Frequency Responce ... 35 Hz ~ 200 Hz Notes: 1. Kenwood follows a policy of continuous advancements in development. For this reason, specifications may be changed without notice. 2. Full performance may not be exhibited in extremely cold locations (below 0 deg. C).