Control Panel Keys - Brother HL-5445D User Manual

General Information

Control panel keys

The control panel keys have the following functions:
Cancel key
 Cancel printing
Cancel the current job being printed: If you press Cancel while printing, the machine will immediately stop
printing and will then eject the paper. The Ready and Error LEDs will blink as the job is being canceled.
Cancel all the received jobs: To delete all jobs, press and hold Cancel for about 4 seconds until all the
LEDs light up and then release it. The Ready and Error LEDs will blink as the job(s) is being canceled.
Go key
 Error recovery
If there is an error, the machine will recover automatically from some errors. If an error is not automatically
cleared, press Go to clear the error, and then continue to use the machine.
Form feed

If the Ready LED blinks for a long time, press Go. The machine will print any data that is left in the
machine's memory.
Reprint

To reprint the last document, press Go for about 4 seconds until all the LEDs light up and then release it.
Within 2 seconds press Go the number of times you want to reprint. If you don't press Go within 2 seconds,
a single copy will be printed.
If you print with the Windows
Reprint in the printer driver will take priority over the settings made on the control panel. (For more
information, see Use Reprint uu page 36.)
®
printer driver we have supplied with the machine, the settings for Use
3
3
81