Battery Status Indication; Power Saving - Creative Sound Blaster Roar SR20A User Manual

Charging your speaker - LED Indications

Battery Status Indication

Battery full
Battery at about 70%
Battery low
Battery extremely low
Slow Blink
Battery charging*
Running LED
Whenever the speaker is ON and connected to a power source, the LED
status indicators will continually blink in sequence. To check the battery
capacity, power OFF the speaker or disconnect it from the power adapter.

Power Saving

For better user connectivity experience, the Sound Blaster Roar will
now by default automatically enter power saving mode only after
approximately 28 hours of inactivity when the power adapter is attached
via a main outlet to the speaker. However, you have the option to keep
the power on permanently if needed.
To Disable Power saving mode with power adapter attached (For
keeping your speaker ON permanently):
1) Ensure that the speaker is powered ON and not connected to any
other devices.
2) Press the Power and Volume "+" button together. The LED status
indicator will flash once to indicate power saving feature is disabled.
To Enable Power saving mode with power adapter attached:
1) Ensure that the speaker is powered ON and not connected to any
other devices.
2) Press the Power and Volume "-" button together. The LED status
indicator will flash once to indicate power saving feature is enabled.
Note: The speaker automatically powers down when there is no
Bluetooth connection, recording using microSD card, microSD card
playback or audio input for more than 15 minutes on battery mode. This
feature helps to protect the internal battery and cannot be disabled.
5