Playing Mp3 / Wma Audio Files - Creative Sound Blaster Roar SR20A User Manual

Playing MP3 / WMA audio files

Your Sound Blaster Roar comes with a built-in
WMA/MP3 player.
Besides streaming music
from your smart phone
wirelessly via Bluetooth ,
the Sound Blaster Roar
can also play audio files on
a microSD card with the
built-in WMA/MP3 player.
Playback tips
You can play WMA,
l
WAV or MP3 files.
The Sound Blaster Roar
l
supports microSD or
microSDHC cards up to
32GB.
The Sound Blaster Roar doubles up as a microSD
card reader!
Here's how you do it!
1
Insert a microSD card.
2
Connect the speaker to a computer via USB cable.
3
Press and hold
Sound Blaster Roar has switched from USB Audio Device to USB
Mass Storage Device.
* If no tone is heard, disconnect the cable from the computer, and start
from Step 1 again.
4
Browse or modify microSD card contents on your computer.
Note:
To switch back to USB Audio Device, either follow step 3 again or eject the USB Mass
l
Storage Device from the computer. Alternatively, you can power OFF and ON the
Sound Blaster Roar.
Depending on your operating system, a pop-up message may appear informing you
l
that the Mass Storage Device has not been ejected properly. This is normal and not
disruptive to your microSD card.
Here's how you do it!
1
Insert a microSD card.
2
Press
3
Navigate through tracks.
To skip tracks (in Repeat All
mode):
Press or
To skip folders:
Press and hold
OR
Press or
stopped.
until you hear a tone.* This signifies that the
12
.
during playback.
or during playback.
when playback is
microSD
Card