Hughes 9300 Series Installation Guide
The Antenna Outdoor Unit (ODU)
The antenna unit is composed of the antenna element, high power and low noise
amplifier systems, and a mechanical tracking system.
Both the Class 10 and Class 11 ODUs are two-axis antennas intended for land-mobile
use.
Connection to the ODU is made by a TNC connector. The single coaxial cable carries
L-band RX and TX, power, and tracking information.
WARNING: Only use the C10 antenna supplied with the 9300 Series Terminal.
Do not use the similar looking C10EE antenna from a Hughes 9250.
Figure 12 – Class 10 Antenna ODU Ø477 mm X 153 mm Height
13