Power Control; Before Starting - Electrolux SuperCyclone User Manual

23
24
25
27
29
31a
English

Before starting

22
22 Open the front cover on the machine and check
that the motor filter and the dust container filter
are in place. (See also Maintaining the filters.)
23 Open the back lid on the machine and check that
the exhaust filter is in place.
24 Insert the hose until the catches click to engage
(press the catches to release the hose).
25 Insert the hose into the hose handle until the
catches click to engage (press the catches to
release the hose).
26 Attach the telescopic tube* to the hose handle
and nozzle by pushing and twisting together.
(Twist and pull apart to dismantle.)
(Certain models have a lock button that must be
pressed before the hose and telescopic tube can be
pulled apart)
26
27 Pull out the power cord and connect it to the
mains.
28 To rewind the cord, press the cordwinder pedal.
29 Start the vacuum cleaner by rotating the power
control in the direction of the "Max" position.
Increase suction power by rotating the control
further up to "Max" position. Stop the vacuum
cleaner by rotating in the opposite direction to
"Off" position.
In order to achieve an optimal cyclone effect in the
28
cleaner, the power regulation should always be in
the "Max" position.
30 Suction power can also be adjusted by using the
suction control on the hose handle.
Ideal parking position for pausing (31a) and stor-
ing (31b).
30
31b
* Certain models only.
8