Video/Picture/Music Playback; Loading A Disc; Bd/Dvd Video Playback - Onkyo BD-SP309 Instruction Manual

Video/Picture/Music Playback

Loading a Disc

ON/STANDBY
1
Press on the remote control or on the
Player to turn on the power.
2
Press OPEN/CLOSE to open the disc tray.
Load a disc on the disc tray.
3
• Insert the disc with the label face up.
• In case of disc recorded on both sides, face
down the side to play back.
4
Press OPEN/CLOSE to close the disc tray.

BD/DVD Video Playback

This section explains playback of commercially
available BD Video and DVD Video discs (like
movies) and recorded DVD-RW/R discs.
• This player supports DVD upscaling during DVD
playback.
• For a description of other playback functions,
refer to "Playback Functions" on page 33.
En
Downloaded From Disc-Player.com Onkyo Manuals
22
1
(open/close)
2
• The disc load time may vary depending on the
Regarding playback of BD video discs
• Some of the newly released BD video discs
• Refer to page 45 for more information regarding
To stop playback
Press
• If you press
• Resume playback may not function depending
Load a disc.
• Playback may begin automatically,
depending on the disc.
• Playback begins from the ¿ rst title.
• The menu may be displayed ¿ rst, depending
on the disc. Perform playback operation by
following the directions on the screen.
• When loading a disc containing 3D content
(3D BD video) with "Yes" selected in the "3D
Notice" setting (Page 42), playback will be
stopped and the 3D notice will be displayed
on the TV screen. In such cases, press
ENTER for con¿ rmation, and then playback
will start.
Press if playback does not begin
automatically or playback is stopped.
NOTE
disc.
cannot be played back unless you update the
player software to the latest version. Therefore,
it may be required to update the software of the
player.
software updates for the player.
.
Resume playback function
next, playback will resume
from the point where the Player was previously
stopped. To playback from the beginning, cancel
resume mode by pressing
(This may not work depending on the type of
disc. In this case, open the disc tray or enter
standby.)
NOTE
on the disc.
, then press .