Advertisement
Front Panel:
1. Input:
This is an instrument input for plugging in
virtually anything. You may plug in a guitar
(bass or lead), keyboard, CD-Player or any
pre-amplified signal.
2. Overdrive:
This push button switches between the clean
and overdrive channels.
3. Gain:
This is the distortion intensity control for the
overdirve channel.
4. Volume:
This is the overall level control for the
overdrive channel
5. Volume:
This is the overall level control for the normal
channel
6. Treble:
EQ control for high frequency range (3kHz)
7. Middle:
EQ control for mid frequency range (1kHz)
8. Bass:
EQ control for low frequency range (100Hz)
9. Headphones: Inserting a headphone jack will disconnect
internal speaker for quiet private practicing.
10. Line Output: Line signal output, Impedance = 1k ohms
11. Power:
Power switch
Back Panel:
C AU TIO N :
IN P U T P O W ER
2 3 0 VAC ~ 5 0 H z
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
4 0 W M AX
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
1. AC Line Cord
Technical Specifications:
Rated Power
Frequency Response
THD
S/N ratio
Input Impedance
Power Consumption
Maximum Input Level
Dimensions (HxWxD)
Weight
CAUTION:
RISK OF ELECTRIC SHOCK
CAUTION: Chassis surface hot.
WARNING: To reduce the risk of fire or electric shock,
do not expose this equipment to rain or moisture.
AVIS: Risque de choc electricque ne pas ouvrir.
ATTENTION: Superficie de chassis chaude.
20W RMS @ 4 ohms (Overdrive)
14W RMS @ 4 ohms (Clean)
70Hz - 10kHz
0,5% (Clean)
75dB
220k Ohm
40VA (max.)
0.7Vrms
340mm x 380mm x 175mm
7,0kg
DO NOT OPEN
Advertisement
