Assembly screw (4)
(silver)
•
M5 × 20 (mm)
Pole
•
TBL5ZA3051
Assembling the pedestal
Use the assembly screws
to the base
securely.
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way will
strip the threads.
A
Pole
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking
the TV.
1
Remove the assembly screws
2
Pull out the pedestal from the TV.
3
Remove the assembly screw
4
Pull out the cover.
5
Remove the assembly screws
Assembly screw (4)
(black)
•
M5 × 25 (mm)
Base
•
TBL5ZX0043
(TH-P42ST30Z)
•
TBL5ZX0072
(TH-P50ST30Z)
to fasten the pole
Base
Front
.
from the TV.
from the cover.
from the pole.
Assembly screw (1)
(black)
•
M4 × 8 (mm)
Cover (1)
•
TBL5ZB3039
•
Attach the cover
with assembly screw
C
B
Bottom view
Rear side
Hole for
pedestal installation
Pole
Base
7