Options - Harman XXV Freestanding Pellet Stove Installation & Operation Manual

XXv Top Flue Option - Harman® Part #1-00-677120
The Top Flue option attaches to the exhaust on the rear of
the stove, and extends it to the top with a six inch stub.
This gives the appearance of a wood stove and also allows
venting with existing single wall, connector.
A 12 inch piece of 4" pellet vent is included to act as an
insulator only. Note: The top flue adaptor is not approved for
use with pellet vent pipe. It is only tested for use with chimney
connector (6- inch pipe) into an existing "class A" chimney.
direct vent wall Passthrough
The Harman® Direct Vent Wall Passthrough makes installing
your Harman® Pellet Stove with outside air a lot easier. It is
made to fit walls from 4 1/2" up to 10 1/8" thick with a square
opening of 6" to 6 1/2".
28
XXV Pellet Stove

Options

Harman® Part #1-00-677177
Adjustable from 4 1/2" to 10 5/8" wall thickness
Passthrough hole
for 3" or 4" PL vent
pipe
Outdoor Half
Indoor Half
3-90-00885R17_02/15
Side View