Dtmf Calls; Manual Dialing; Redialing; Auto Dialing - Kenwood TK-690 Instruction Manual

You can make DTMF calls using the optional KMC-28 DTMF microphone.
■

Manual Dialing

To dial a number manually:
1 Press and hold the PTT switch.
• If Keypad Auto PTT is enable, you do not need to press the PTT switch (please
consult your dealer for enabling this function).
2 Press the desired DTMF keys.
■

Redialing

A maximum of 16 digits can be redialed. The last number dialed, either
manually or automatically, will be redialed.
To redial a number:
1 Press the
• An "A" will appear on the display.
2 Press the 0 key.
• The transceiver will redial the last number, and the digits will appear on the
display.
If the transceiver power is switched OFF, the redial memory will be erased.
Note:
■

Auto Dialing

Note: Auto dialing is either enabled or disabled by your dealer.
Store:
To store a number in memory:
#
1 Press the
• A "D" will appear on the display.
2 Press the desired DTMF keys to enter a maximum of 16 digits.
• Press and hold the PTT switch, then press 2, 5, 8, 0,
#
D, , or
#
3 Press the
4 Select the desired memory channel by pressing a DTMF key (1 ~ 9).
• The number entered in step 2 will be stored in the memory channel selected.
16

DTMF CALLS

key.
key.
(respectively).
key.
#
, or to enter A, B, C,