Sony TRINITRON KV-29FS150 Service Manual page 82

No signal
Dotted lines or stripes
Double images or
ghosts
Sound
Good picture, no
sound
TV cannot receive FM
Radio stations
Channels
I cannot receive higher
number channels (UHF)
when using an antenna
Cable stations don't
seem to work
If after reading this instruction manual you have more questions about the use of your Sony television, contact your local Sony
authorized dealer to get technical assistance or visit our internet page http://www.sony.net/.
16
❏
Check the Cable setting in the Channel Setup Menu (page 12).
❏
Check the connections to the antenna or pay television source
(page 4).
❏
Make sure that the channel selected is broadcasting a signal.
❏
Adjust the antenna.
❏
Move the TV away from other electronic equipment. Some electronic
equipment creates electrical noise, which can interfere with TV reception.
❏
Check the outdoor antenna and its orientation, or call technical support
for your pay television service.
❏
Press so that Muting disappears from the screen (page 2).
❏
Check the Sound Mode settings. The television may be set to Auto SAP
(page 11).
❏
Connect a separate FM antenna and the TV channel source through an
antenna selector (switch) to your TV.
❏
Make sure that Cable is set to Off in the Channel Setup Menu (page 12).
❏
Perform Auto Program to add channels that are not presently in the memory
(page 7).
❏
Make sure that Cable is set to On in the Channel Setup Menu (page 12).
❏
Perform Auto Program to add channels that are not presently in the memory
(page 7).