Clock Button; Wireless Remote Controller - Mitsubishi Electric Mr.SLIM PCA-RP50KAQ Service Manual

Wireless remote controller (Option)
OPERATION MODE display
OPERATION MODE display
Indicates which operation mode is in effect.
display
The vertical direction of airflow is indicated.
display
Displays selected fan speed.
ON/OFF button
The unit is turned ON and OFF alternately
each time the button is pressed.
FAN SPEED SELECT button
Changes the fan speed.
MODE SELECT button
Switches the operation mode between
COOLING/DRY/FAN/HEATING and AUTO
mode.
In case the outdoor unit is cooling only
type, the heating and auto mode are not
available.
CHECK-TEST RUN button
Performs an inspection check or test
operation. Do not use it for normal
operation.
VANE CONTROL button
Changes the air flow direction.
CHECK TEST RUN display
Indicate that the unit is being checked or
test-run.
MODEL SELECT display
Blinks when model is selected.
TEST
CHECK
COOL
RUN
MODEL
DRY
SELECT
STOP AMPM
AUTO
FAN
FAN SWING
START AMPM
HEAT
NOT AVAILABLE
ON/OFF TEMP
FAN AUTO STOP
MODE VANE AUTO START
CHECK LOUVER
TEST RUN min
SET RESET CLOCK
5
Lights up while the signal is transmitted to
the indoor unit when the button is pressed.
Temperature setting display
Indicates the desired temperature setting
which is set.
CLOCK display
Displays the current time.
TIMER display
°F
Displays when in timer operation or when
°C
setting timer.
"
Displays the order of timer operation.
"
Displays whether timer is on or off.
Sets any desired room temperature.
TIMER CONTROL buttons
h
AUTO STOP (OFF timer): when this switch
is set, the
automatically stopped at the preset time.
AUTO START (ON timer): when this switch is
set, the air conditioner will be automatically
started at the preset time.
"h" and "min" buttons
Buttons used to set the "hour and minute" of
the current time and timer settings.
LOUVER button
Changes left / right airflow direction.
(Not available for this model.)

CLOCK button

RESET button
display
" " " display
" " " display
button
air conditioner will be
SET button