Clock Button; Reset Button - Toyotomi DCT 100HSPi Service Manual

Control
After Sliding the cover, the button and function are as follows:
Auto louver button
Push this button to swing
louver. Push the button
again to stop.
Confirmation button
Push this button to confirm
ON and OFF timer settings.

Clock button

Push this button to set
time.
Lock button
When you push the LOCK
button, all current settings
are locked in and the remote
controller does not accept
any operation except that of
the LOCK button. Use the
lock mode when you want to
prevent setting from being
changed accidentally or play
fully. Push the LOCK button
again when you want to
cancel the LOCK mode.
FAN
Timer button
Push ON-TIME timer
button to set the ON timer.
Push OFF-TIME timer
button to set the OFF timer.
This button is used for
setting the current time
and OFF time.
Adjust forwards
Adjust backwords
Push this button to cancel
ON timer and OFF timer.

RESET button

When you push the RESET
button, all current settings
are cancelled and get into
the condition of beginning.
In the clock, the colon in
"0:00" will flash, the mode
displays "AUTO", fan speed
displays "AUTO", the
temperature displays "24".
Control