Dom Pwr Connector (Jsd1); Overheat Led Header - Supermicro SuperO A1SAM-2750F User Manual

A1SAM/A1SRM Series Motherboard User's Manual

DOM PWR Connector (JSD1)

The Disk-On-Module (DOM) power
connector, located at JSD1, provides
5V power to a solid state DOM storage
device connected to one of the SATA
ports. See the table on the right for
pin definitions.

Overheat LED Header

The JOH1 header is used to connect
an LED indicator to provide warnings
of chassis overheating and fan failure.
This LED will blink when a fan failure
occurs. Refer to the tables on right for
pin definitions.
JBAT1
JF1
BATTERY
SP1
BUZZER
B
COM2
USB4/5
LAN2/LAN4 LAN1/LAN3
JUIDB1
JVGA1
BMC
JLAN2 JLAN1
LAN3/4 LED
PHY
A1SAM/A1SRM Series
Rev. 1.01
BIOS
SoC Processor
JBT1
A
1
2-22
DOM PWR
Pin Definitions
Pin# Definition
1 5V
2 Ground
3 Ground
Overheat LED
Pin Definitions
Pin
1
2
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State
Off
Solid
Flashing
USB 2/3 USB0/1
COM1
IPMI_LAN
PWRI2C
Definition
5vDC
OH Active
Definition
Normal
Overheat
Fan Fail
A. DOM PWR
B. Overheat LED Header