Playback Of Disc; Basic Play - Kenwood DVR-5070 Operation Manual

Playback of disc

Basic play

1
Load a disc
MAIN UNIT
2
Select the DVD CD
MAIN UNIT
÷ When a disc is set on the tray and DVD/CD is selected,
playback of the disc will be started automatically.
3
Start playback
MAIN UNIT
÷ Each press PLAY/PAUSE
key on the main unit
pauses and plays the disc
alternately.
To stop playback
MAIN UNIT
REMOTE
DVD CD
REMOTE
SELECT
÷ Press 8 key on the remote
control unit to pause the disc.
REMOTE
AUTO/MONO
DVD CD key
8(Pause) key
7(Stop) key
3(Play) key
1 Open the tray.
2 Place a disc.
3 Close the tray.
÷ When the PLAY/PAUSE key on the main unit is pressed
instead of the EJECT key in step 3, the tray will close
and playback will start automatically.
When a Disc Menu appears on the screen
In case of interactive DVDs, a Disc Menu appears on the screen.
Then press ENTER to select specific menu you want to play by using
Cursor keys.
When a menu screen is recorded on the
disc, the menu screen will be displayed
when the TOP MENU key is pressed. At
the menu screen, the menu can be se-
lected by pressing the Cursor keys.
÷ When the PLAY/PAUSE key on the main unit is pressed while
an input other than disc is selected, the unit will be switched to
DVD/CD and playback will start.
TRACK No. (CD)
TITLE No. (DVD)
RESUME playback
When the STOP key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where
the playback had been stopped. This is called the
RESUME function. When the STOP key is pressed
again during stop, the RESUME function is can-
celled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
PLAY/PAUSE key
STOP key
INPUT key
Label side
GUIDE
CHAPTER No. (DVD)
Time display
21
DVR-5070 (EN)