Hyundai i10 Owner's Manual & Service Booklet page 213

4. Remove the wheel lug nut wrench,
jack, jack handle, and spare tire
from the vehicle.
5. Block either the front or rear of the
wheel that is diagonally opposite
the jack position.
WARNING
• To prevent vehicle movement
while changing a tire, always
set the parking brake fully,
and always block the wheel
diagonally opposite the wheel
being changed.
• We recommend
wheels of the vehicle be
blocked, and that no person
remain in a vehicle that is
1VQA4023
being jacked.
- Changing a tire
that the
6. Loosen the wheel lug nuts coun-
terclockwise one turn each, but do
not remove any nut until the tire
has been raised off the ground.
What to do in an emergency
OPA067004
8 9