Hyundai i10 Owner's Manual & Service Booklet page 167

Features of your vehicle
• Pairing phone
®
Before using Bluetooth
phone must be paired (registered) to the
audio system. Up to 5 phones can be
paired with the system.
NOTE:
The pairing procedure of the phone
varies according to each phone
model. Before attempting to pair
phone, please see your phone's
User's Guide for instructions.
NOTE:
Once pairing with the phone is com-
pleted, there is no need to pair with
that phone again unless the phone is
deleted manually from the audio sys-
tem (refer "Deleting Phone" section)
or the vehicle's information
removed from the phone.
6 98
1. Press
features, the
2. Say "Set Up".
- The system replies with available
commands.
- To skip the information message,
press
heard.
3. Say "Pair Phone"
4. Proceed at next step.
5. Say the name of your phone when
prompted.
- Use any name to uniquely describe
your phone.
- Use Full name to voice tag.
- Not use to short name or similar to
voice command.
6. Bluetooth
name you stated.
7. Say "Yes" to confirm.
is
8. The audio displays "searching ----
passkey: 0000" and asks you to initiate
pairing procedure from the phone.
9. Search the Bluetooth
phone .Your phone should display your
[vehicle
®
Bluetooth
pairing on your phone.
button.
again and then a beep is
®
system will repeat the
®
system on your
model name] on the
device list. Then attempt
10. After Pairing is completed, your
phone will start to
phone/contact list to the audio sys-
tem.
- This process may take from a few
minutes to over 10 minutes depend-
ing on the phone model and number
of entries in the phone/contact list.
11. By manual operation:
- Select "PAIR" in PHONE menu, then
proceed from step 5.
NOTE:
• Until the audio displays "Transfer
®
Complete", Bluetooth hands-free
feature may not be fully operational.
• Depending on the phone make and
model, the phone book contact list
mat not transfer to the audio system.
transfer