Sony DSC-W200 Service Manual page 22

Digital still camera

Hide thumbs Also See for DSC-W200:

Table of Contents

2-3-2. HOW TO INSTALL THE BARRIER ASSY

1 Install the new barrier assy and fix it temporarily with two screws so that it can move slightly.

2 Install temporarily the new ornamental ring (A) and adjust the position of barrier assy.

*The top sides of barrier assy and ornamental ring should be flat.

Take care for contacts of parts not to conflict each other.

3 Remove the ornamental ring (A) once and tighten firmly it again with two screws with extra torque.

*Tightening torque=0.059 0.01N m(0.6 0.1kgf cm)

4 Affix the new barrier tape and then install the ornamental ring (A).

3 New Ornamental Ring (A)

DSC-W200_L2

1 Screws

1 New Barrier Assy

3 Screws

2 New Ornamental

Ring (A)

4 New Ornamental Ring (A)

4 New Barrier Tape

2-10

2 Adjust the position of barrier assy.

New Barrier Assy

Contacts of Parts

New Ornamental

Ring (A)

Table of Contents