Sony DSC-W200 Service Manual page 21

q; With the lens set to the "Tele end", install the naruto shaft, naruto washer, naruto gear and zoom (1210) gear block assy
in order. Then, fix the zoom (1210) gear block assy with two screws.
*Tightening torque=0.049 0.01N m(0.5 0.1kgf cm)
qa Remove two screws, and remove the barrier assy.
*Discard the removed barrier assy.
DSC-W200_L2
q; Naruto Shaft
q; Naruto Washer
q; Naruto Gear
q; Zoom (1210)
Gear Block Assy
q; Screws
Install the naruto washer in the direction
shown in the figure.
2-9
Naruto
Washer
qa Screws
qa Barrier Assy