Audio Control; Audio Setup; Bass Boost - Kenwood DNR-1000U Instruction Manual

Audio Control

1
Select the source to adjust
Press the [POWER] button.
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Audio item
Turn the [VOL] knob.
Adjustment Item Display
System Q "NATURAL"/"ROCK"/
"POPS"/"EASY"/"TOP40"/
"JAZZ"
Bass level "BAS L"
Middle level "MID L"
Treble level "TRE L"
Balance "BAL"
Fader "FAD"
Exit Audio Control mode (Volume control mode)
⁄
About System Q
• You can recall the best sound setting preset for different
types of music.
• Change each setting value with the <Speaker Setting>
(page 8). First, select the speaker type with the Speaker
setting.
• "USER": The ranges selected lastly for Bass level, Middle
level, and Treble level are recalled automatically.
5
Exit Audio Control mode
Press any button.
Press a button other than the [VOL] knob and [ATT]
button.

Audio Setup

Setting the Sound system, such as Volume offset.
1
Select the source to adjust
Press the [POWER] button.
2
Enter Audio Setup mode
Press the [VOL] knob for at least 1 second.
3
Adjust the Audio setup item
Turn the [VOL] knob.
Adjustment Item
Volume offset
⁄
• Volume offset: Sets each source's volume as a difference
Range
Natural/Rock/
Pops/Easy/Top 40/
4
Exit Audio Setup mode
Jazz
Press the [VOL] knob for at least 1 second.
–8 — +8
–8 — +8
–8 — +8

Bass Boost

Left 15 — Right 15
Rear 15 — Front 15
Bass sound can be enhanced by one-touch
operation.
Press the [B.BOOST] button.
When you press the button once, the current Bass
Boost setting is displayed.
Each time you press the button, the Bass Boost
setting alternates.
Setting
Bass Boost 1
Bass Boost 2
Bass Boost off
Display Range
"V-OFF" –8 — ±0 (AUX : –8 — +8)
from the basic volume.
Display
"BB-L L1"
"BB-L L2"
"BB-L OFF"
English
|
7