Starting The Upgrade - ATEN CS1762 User Manual

CS1762 / CS1764 User Manual
4. Shut down the computers on your CS1762 / CS1764 installation.
5. Invoke Firmware Upgrade Mode (see page 18).
The front panel LEDs flash together to indicate Firmware Upgrade Mode
is in effect.

Starting the Upgrade

To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file – either by double
clicking the file icon, or by opening a command line and entering the full
path to it.
The Firmware Upgrade Utility Welcome screen appears:
Note: The screens shown in this section are for reference only. The
wording and layout of the actual screens put up by the Firmware
Upgrade Utility may vary slightly from these examples.
2. Read the License Agreement (enable the I Agree radio button).
24