Lap Belt Installation; Locking Latch Plate And No Retractor; Sewn On Latch Plate And Alr - Graco 4Ever Instruction Manual

Lap Belt Installation - DO NOT use in Booster Mode
Always review your vehicle owner's manual for specific information about
your vehicle seat belts.
Locking Latch Plate and No
Retractor
When installing the car seat, route
the lap seat belt through the proper
path and buckle it in. Then, pull
upwards on the tail of the belt so
that the lap belt gets tight around
the car seat.

Sewn On Latch Plate and ALR

Slowly pull the lap belt all the
way out. Route the vehicle seat
lap belt through the proper belt path
and buckle it in. Then, pull the lap
belt tight while feeding all the slack
back into the retractor.
Grab the sides of the seat at the belt
path and slide the seat side-to-side and
front-to-back. The seat should not move
more than 1 inch (2.5 cm).
99