Power Wheels Hurricane K7112 Owner's Manual page 12

Front Grille
13
• Fit the front grille to the grooves in the top of the brush guard,
as shown.
• Inset three screws through the front grille and into the brush guard.
Tighten the screws.
FRONT VIEW
14
• Fit the front grille assembly to the vehicle.
• Insert four screws into the front grille assembly and tighten.
3
Brush Guard
15
• Fit the four fenders marked 1, 2, 3 and 4, to the vehicle, as shown.
Hint: The fenders are designed to fit the vehicle one way.
• Make sure the peg on the inside edge of each fender fits into the
lower hole inside each wheel well.
16
• Fit three screws into the top of each fender and tighten.
12
Meijer.com
4
2
TOP VIEW
J4394pr-0921
1