Kenwood Sovereign VR-5080 User Manual page 57

How Do I Operate Devices?
To set the Digital Rec mode:
1. Press the F. SHIFT = REC (REC MODE)* button on Remote Control
unit.
2. Select "Rec Mode Auto" or "Rec Mode Manual".
It is not possible to recording monitor a digital source signal onto the
device connected to the CD2/TAPE2 MONITOR input.
When a source recorded by down-mixing a multi-channel source is played
back in the Dolby Pro Logic mode, the audio can be reproduced in 4-
channel surround sound.
* When an operation is described as [F.SHIFT = REC (REC MODE) but-
ton], for example, press the F.SHIFT button and press the next button
(the REC (REC MODE) button in this case) within 8 seconds.
49